Hey everyone
I'm all done with my remodel and I go to mount my TV to the wall and see that I need 3 1/2 inch studs to install the mount.
The studs are 16 inches apart (which are with in specs). They are 1 1/2 inches wide (which is also with in specs), but the are 2 1/2 inches deep instead of 3 1/2 inches. For the remodel I built a recessed space for the tv, so the surround wall has extra 2 1/2 inches in front. I figure this will act like added support, but no sure if the TV will be ok on the wall.
Below is a photo of the area for reference.
I'm using this mount:
http://www.sanus.com/en_US/products/mounts/blf213/
and have the Sony 940e which is 95 lbs.
I'm pretty sure that the studs will be fine, but I need some input from the experts. Any help would be great. Thanks.
I'm all done with my remodel and I go to mount my TV to the wall and see that I need 3 1/2 inch studs to install the mount.
The studs are 16 inches apart (which are with in specs). They are 1 1/2 inches wide (which is also with in specs), but the are 2 1/2 inches deep instead of 3 1/2 inches. For the remodel I built a recessed space for the tv, so the surround wall has extra 2 1/2 inches in front. I figure this will act like added support, but no sure if the TV will be ok on the wall.
Below is a photo of the area for reference.
I'm using this mount:
http://www.sanus.com/en_US/products/mounts/blf213/
and have the Sony 940e which is 95 lbs.
I'm pretty sure that the studs will be fine, but I need some input from the experts. Any help would be great. Thanks.